The cylinders are great for using pneumatic launchers where there is no air compresser available. Just add one of our regulators to regulate the presure down from about 800psi to 125psi or less.
*Note: The 2.5lb and 5lb clyendars don't have the plastic valve guard.
Because of the size and weight of the larger cylinders there may be an additional shipping charges.
Be sure to select the cylinder size you want below before adding it to your shopping cart.
EMPTY CYLINDER WEIGHTS(Approximate)
2.5lb Cylinder - 4lbs
5lb Cylinder - 7lbs
10lb Cylinder - 13lbs
20lb Cylinder - 24lbs
Cylinder Approx. Dimentions(Including valve and guard)
2.5lb Cylinder - 4.38in Dia x 14in Length
5lb Cylinder - 5.25in Dia x 18in Length
10lb Cylinder - 6.89in Dia x 20.5in Length
20lb Cylinder - 8in Dia x 27.5in Length
TBL500LP Shot Estimate(1ft x 3in sch40 air chamber at 100PSI. About 88 Cubic Inches.)
2.5lb Cylinder - 50 Shots
5lb Cylinder - 100 Shots
10lb Cylinder - 200 Shots
20lb Cylinder - 400 Shots
These are estimates based on each shot using about 22g or .776oz of CO2. Actual results may vary.
Shot Estimate(3ft x 4in sch40 air chamber at 100PSI. About 453 Cubic Inches.)
2.5lb Cylinder - 10 Shots
5lb Cylinder - 20 Shots
10lb Cylinder - 40 Shots
20lb Cylinder - 80 Shots
These are estimates based on each shot using about 4oz of CO2. Actual results may vary.
