SGTC 1" Sprinkler Valves. The Spudgun Technology Center offers 1" sprinkler valves: conventional off-the-shelf models to specially modified high-performance valves. Either choose regular electrical operation, or the much faster non-electrical pneumatic trigger system for valve actuation. 1" FNPT Standard pipe threads in and out. Choose electrical or pneumatic actuation of valve. (3) 9V batteries required for electrical operation. Air-over-diaphragm design. 125 psi maximum pressure rating. Easy to disassemble if necessary. Pneumatic operation is most 'reactive' (quickest method of actuation).
- 1" FNPT Standard pipe threads in and out.
- Air-over-diaphragm design.
- Choose electrical or pneumatic actuation of valve.
- (3) 9V batteries required for electrical operation.
- Pneumatic operation is most 'reactive' (quickest method of actuation).
- 125 psi maximum pressure rating.
- Easy to disassemble if necessary.
Available as a standard valve, with solenoid, wires, requires 3 9V batteries (or similar 24-27V DC power) and an intermittent switch or button to operate.
Get all the necessary parts for your electric valve. For complete electrical operation, get the valve, three battery pickups, and a spring-loaded pushbutton. Just add electrical tape and batteries. Battery pickups are hard plastic, not those soft plastic coated 9V things in most devices these days.
Pneumatic operation of a sprinkler valve! Coupled to a spring loaded trigger, the trigger can be mounted in a convenient place with the three holes drilled through the trigger body. Hose provided at 18" length with simple hose clamps--can be cut as short as you like for your specific launcher.
Dual pneumatic sprinkler valves paralleled with one trigger.
You can order this component in the Spudtech Store.